Français
Deutsch
Español
Minor scratches, small cuts and limited surface damage can sometimes be repaired without replacing the body of your TPE sex doll. Manufactured for WM Doll, this TPE repair kit contains adhesive and a block of TPE material for carrying out careful cosmetic repairs at home.
The adhesive works by softening and partially dissolving the surface of the TPE. When applied sparingly, it can help reconnect the edges of a small cut or smooth certain superficial marks. The supplied TPE material may also be used when a small amount of material is missing from the damaged area.
Because TPE glue acts quickly, repairs should always be performed gradually. Applying too much adhesive can soften, distort or permanently damage the surrounding material.
What is included?
The package contains:
- one container of TPE repair glue;
- one block of TPE repair material.
Tools shown in instructional photographs or videos are not included unless expressly stated on the product page.
The colour of the supplied TPE block should be checked before use. Even when the repair material is compatible, an exact visual colour match cannot be guaranteed because TPE can change slightly through age, oxidation, staining, previous care products or exposure to light.
Compatibility
This repair kit is intended exclusively for sex dolls manufactured from TPE.
It is particularly suitable for compatible TPE bodies from:
- WM Doll;
- YL Doll;
- other compatible TPE sex doll brands, subject to verification.
WM Doll and YL Doll are associated with the same manufacturing group, but this does not guarantee identical TPE formulas or colours across every model and production period.
Before ordering or applying the product, confirm that the damaged area is made from TPE. Some dolls combine different materials, such as a TPE body with a silicone head. The glue must only be used on the compatible TPE area.
Do not use this kit on silicone, STPE, silicone-coated parts or any material whose composition has not been confirmed.
What types of damage can be repaired?
Depending on the location and severity of the damage, this kit may be suitable for:
- superficial scratches;
- small, clean cuts;
- minor tears that are not under tension;
- limited surface imperfections;
- small areas where a little TPE material is missing.
It is not designed to repair every type of damage. Seek professional advice if the doll has:
- a large or deep tear;
- exposed skeleton components;
- damage around a joint;
- a detached finger or toe containing internal wire;
- damage around the neck connector;
- a split in an area placed under repeated tension;
- internal structural or mechanical damage.
A cosmetic surface repair cannot restore a damaged skeleton, joint, wire or internal mechanism.
Before starting the repair
Place the doll on a clean, stable and protected surface. The damaged area must be completely clean and dry, with no dust, powder, lubricant, oil or moisture remaining on the material.
Before using the kit:
- Confirm that the damaged area is made from TPE.
- Remove clothing, jewellery and accessories from the working area.
- Clean the damaged section according to the doll manufacturer’s care instructions.
- Allow the TPE to dry completely.
- Work in a well-ventilated room, away from flames and sources of heat.
- Protect your hands and surrounding surfaces from contact with the adhesive.
- Test a very small amount on an inconspicuous area whenever possible.
Do not attempt the repair immediately after applying oil, powder, lubricant or another care product. Residue on the surface may prevent the edges from bonding correctly.
How to repair a minor scratch or small cut
For a superficial scratch or a small, clean cut:
- Position the damaged edges carefully without stretching the TPE.
- Apply a very small amount of glue with a suitable fine applicator, such as a toothpick.
- Allow the adhesive to soften the contact surfaces.
- Bring the edges together gently and keep them correctly aligned.
- Remove pressure and leave the area untouched while it bonds and cures.
- Do not stretch, bend, wash or use the repaired area until it is completely cured.
Use the glue drop by drop. Do not pour it directly over the damaged area. Adding more adhesive does not create a stronger repair and may dissolve or deform the surrounding TPE.
Using the supplied TPE repair material
The TPE block is intended for repairs where a small amount of material is missing. This process requires greater care than closing a simple cut.
Use only a small quantity of repair material and follow the instructions supplied with the kit or the repair method confirmed by the manufacturer. The material may need to be prepared gradually with the adhesive to create a suitable repair compound.
Do not apply an uncontrolled quantity of glue, do not use an open flame, and do not overheat the repair material. Excess heat or solvent can cause burns, fumes, discolouration, deformation or further damage to the doll.
If the missing section is large, deep or located near an articulated or load-bearing area, stop and request professional advice rather than attempting to fill it at home.
After the repair
Allow the repaired area to cure completely before touching, cleaning, powdering or placing it under tension. Actual curing time can vary depending on the amount of glue used, the size of the repair and the surrounding conditions.
Once the repair is fully cured:
- inspect the area without pulling on it;
- clean away only removable surface residue;
- apply renewal powder only when the material is dry and stable;
- avoid repeated stretching of the repaired section;
- monitor the repair during future use.
A repaired area may remain visible or feel different from the original surface. This kit is intended to reduce minor damage, but it cannot guarantee an invisible or factory-equivalent finish.
Important safety information
- For compatible TPE sex dolls only.
- Never use on silicone.
- Keep away from children and pets.
- Use in a well-ventilated area.
- Keep the glue away from flames, sparks, and heat.
- Avoid contact with the eyes, mouth and skin.
- Do not swallow or inhale the adhesive.
- Close the container securely after use.
- Follow all safety information printed on the product packaging.
- Stop immediately if the TPE becomes excessively soft, sticky, distorted or discoloured.
Improper use can make the original damage worse. Realistic Love Doll cannot accept responsibility for damage caused by incorrect application, excessive adhesive, incompatible materials, heat, an unsuitable repair method or failure to follow the manufacturer’s instructions.
If you are uncertain about the material, the position of the damage or the correct repair method, contact us before using the kit. Please provide the doll’s brand and model together with clear photographs of the damaged area.
Frequently asked questions
Can this kit be used on a silicone sex doll?
No. This kit is designed exclusively for compatible TPE. TPE glue can damage silicone and must not be used on a silicone body or head.
Can it repair a large tear?
Not necessarily. It is mainly intended for superficial scratches, small cuts and limited cosmetic damage. Large, deep or structural tears may require professional repair.
Is it compatible with YL Doll?
The kit may be used on compatible YL Doll TPE bodies because YL Doll and WM Doll are associated with the same manufacturing group. However, the material and colour should still be checked for the specific model.
Will the repaired area be invisible?
An invisible result cannot be guaranteed. The appearance depends on the type of damage, application method, TPE colour, age of the doll and condition of the surrounding material.
Can I apply a large amount of glue to make the repair stronger?
No. Excess adhesive can dissolve or deform the TPE. Apply only a very small amount at a time and work gradually.
How long should the repaired area be left to cure?
Follow the instructions supplied with the product. Do not manipulate, stretch, wash, powder or use the repaired area until the adhesive has fully cured.
What should I do if I am unsure whether the doll is made from TPE?
Do not use the kit until the material has been confirmed. Contact us with the doll’s manufacturer, model and photographs of the damaged area.
